Tools, etc.

Knipex Crimper

tool

This is the very best tool for crimping the wire connectors for both Schmidt hub terminals as well as the terminals on dynamo lights from Schmidt, Busch & Müller and Spanninga. Place the connector in the tool, insert the wire into the connector, and squeeze to make a perfect crimp onto both the insulator and the conductor. Made in Germany.

Knipex 97 52 14 Our best crimping tool $ 240.00

Schmidt Basic Crimper

tool

This multi purpose tool crimps the connectors, and also strips insulation from wires. Not as sophisticated as the Knipex tool, as you must crimp the insulator and the conductor separately. But for the shop installing the occasional dynamo light system, it's ideal. It's also ideal for the home mechanic. Made in Germany.

Basic Crimper crimp the connector, and strip insulation $ 60.00
     
     
     
 
Arai drum brake removal tool Safely removes the Arai from your hub.
$ 34.00
Phil Wood BB tool You need two of these to install in an Italian thread frame. You can get away with only one in a British thread frame, but two is much easier.
$ 16.00
Tacx Cone wrenches These are the best I've ever used. My standard cone wrenches here in the shop. Very comfortable rubber handle. Perfect fit on the cone. 13mm through 17mm in stock.
$ 9.50
Tacx headset spanner 32mm size, fits most 1" threaded headsets like Campagnolo, Shimano, etc. Very comfortable rubber handle. Perfect fit on the nut so it won't mar aluminum headsets. You'll need two of these to adjust a headset.
$ 18.00
Wheelsmith Spoke Tension Gauge The best way to know if your spokes are tensioned properly
$ 125.00
Rema TT01 patch kit A real patch kit, not the useless glueless type
$ 3.00
Shimano FC-16 For installing Hollowtech II crank arm $ 2.30

Back to: Products page

Back to: Peter White Cycles home page

Mail to:

The email link above uses javascript to hide the actual address from spambots. Your browser needs to be set to run javascript in order for you to use any of the email links on my website. If you can't see the links, you can call us or send a fax. You can also type the address into your email software. First, type the alias, "pjw". Then type the "@" sign. It's above the number 2 on your keyboard. Then type the domain, "peterwhitecycles.com". Don't put in the quotes! That should do it.

We use the javascript so that the spammers can't see the actual email address. I hope it works.

Sometimes the volume of email is so great we can't get to it all. For important communication, please phone, or phax.

It's best to call before 4PM Eastern time since after that we're either running around like headless chickens or at home ready to jump into the pot.

Under no circumstances should you place an order without first reading this.

This page updated: Wednesday, January 25, 2012

Peter White Cycles
24 Hall Rd.
Hillsborough, NH 03244
USA
603 478 0900 Phone
603 478 0902 Phax